- Turn off the printer (press the on / off)
- Press stop button / reset button, do not release
- Press the power button again, until the power LED lights (Do not release).
- Release stop button / reset, press the stop button again reset 2 times.
- Release the power button on / off
- Wait until the main LED (not power LED) designate the number 0 on the PANEL PRINTER
- Press stop button / reset 4 times,
- Press the power button 1 time (Roller paper will spin, power LED blinking)
- Wait until the LED stops blinking and the printer standby (no response go directly to the next stage)
- Press led power on / off button to turn off the printer ..
- Turn it on again ...
Instructions for using MP TOOL
- Turn on the printer as normal. Then you press the power button and unplug the printer cable then plug again continue press stop button / reset 1 x. Power button should not released first. after press the stop button reset then you release the printer will go into service mode the sign the printer button on it off but the alarm light yellow flash. Continue a new printer will appear on your computer
- Turn on the MP Tool program, then it will be read your printer, if unread repeat the first step. when it's readable then you press button read and save MP Printer bin, after completion you try to press the erase button. then the program will perform the erase and then write eprom, after that, continue to step 3 rd.
- Unplug the power cable continue plug again and try turn on. after turn on black cartridge would not readable do not worry, and you still have not been able to print do not worry, you try to unplug the printer cable on your computer, continue use printer cable that you just make a copy, try black and color copies of documents, when it can just plug your printer cable, and try to use to print.